Simple 12v Power Supply Housing from Xbox
Description
I made this simple box to convert the Xbox power supply to a 12v Benchtop little box. The back panel dovetails into the rear of the box with a slot to have the power cable slip into, the dovetail has a little bit of play for machines that aren't tuned super tight (0.25mm smaller), I glued mine shut by just adding a tiny bit of acetone on the bevel of the back plate, and sliding it in place. I wired the Blue and Red wires to the the terminals on the switch, and connected the Yellow wires to the Red Binding Post, and the Black & Grey Xbox wires to the Black Binding post. The Binding posts are your standard dual banana jack with a 6MM diameter and 18.5MM apart (center to center). The Rocker switch is a 20MMx13MM.
Statistics
Likes
0
Downloads
0