GIRO.HUE - Motion Sensor Wall Mount
Description
####GIRO.HUE - Motion Sensor Wall Mount#### ####General#### This bracket was designed to be mounted with the original magnet and screw provided by Philips. The wall mount can be rotated by the middle section and the arm can be adjusted lineary due to a single axis rotation ensured by the additional M3 screw. **Additional screws, nuts and washers per bracket** 1x M3x16 Socket Screw 1x M3 Nut 1x Wall Screw (Anchor + screw or regular wood screw, depends on wall or use double sided adhesive) - - - ####Printing#### I would recommend to use 3 or more perimeters. Print with a lower speed, for example 40 mm/s, to get a more accurate printing. I recommend to print the bracket with at least 50% Infill. - - - ####Firmware adjustments#### No Formware Adjustments needed. - - - ####Additional Information#### Let me know if there are any kind of problems with the wall mount. I will try to help and if neccessary correct the design. I appreciate any kind of feedback to this bracket. If you like my work and find it really usefull then I would be very happy if you give me a small tip as an appreciation for my work. 
Statistics
Likes
0
Downloads
0