Center Finder / Gauge / Template, 90 & 45 Degree Square & Protractor, for Dowels, Square Stock, etc.
Description
This is another version of a center finder tool for end stock (dowels, boards, pipes, etc.); with additional functionality as a 90 degree square and simple 45 degree protractor. There are two versions: 2mm (light weight) or 3mm (stiffer) walls & face. The 3mm version side walls are 2mm taller, for more rigidity and contact with the stock material. These are designed to be used with a mechanical pencil (=/< .09mm lead) or a fine tip marker (Sharpie). Both versions have a capacity of circular stock with radii up to 150mm (~6") and 70mm (2.75") board to cross at a 45 degree angle. Both tools have rough edge clearance channels and corners to help with messy edges from previous cuts. see pictures for more detail. The tool stand upright on its side for checking square and 45 degree angles. I guess if you were desperate, and you has some string, you could use it as a plumb bob as well, though it is not very heavy. See photos for more functionality. 2mm Version Dimensions: 80mm x 80mm x 10mm (~3 x 3 x .4"); ~8 grams/2.72 meters of filament @ 100% infill. 3mm Version Dimensions: 81mm x 81mm x 13mm (~3.19 x 3.19 x .5.12"); ~14 grams/4.67 meters of filament @ 100% infill. The pictures are of the 2mm version (100% infill), the first one I designed. It worked fine the first time I used it on all of the different materials, but I wondered if a stiffer version would work better. I made the 3mm version and I prefer it. I figure that if I am going to print a tool that I will use in my workshop for a long time, why skimp on a few grams of filament? Both versions have a hook hole for hanging in a nail or on pegboard.
Statistics
Likes
0
Downloads
0