X-Gantry leveling tool for Anet PK6
Description
To make the X-Gantry perfectly level, the two Z-motors on the Anet A6 with Aluminum conversion (PK6, https://www.thingiverse.com/thing:3104186) need to be synchronised but they are easily misaligned; this tool helps with levelling the x-gantry easily Print two of each of the two parts *, preferably all in the same print (so they are all identical) You will need M3x20 with nut x2 M5x16 with t-nut (or square nut from the PK6 kit) x2 * the two parts are - lever - base If you don't have bolts x16, remix the base to countersink the head of the bolt. The two parts should interlock easily but firmly, stiff!
Statistics
Likes
0
Downloads
0