Dremel 8220 w/ Flex Shaft Desk Mount
Description
Required hardware: 4x M3x18-22 bolts 4x M3 Nut 1x M3x12 or longer 1x M3 Locknut 4x mounting screw of your choice. (mounting hole is 10mm dia. countersink, so most screws will fit nicely) NOTE: -The "Holder" part is a tight fit, but I didn't have any issues lightly flexing it around the random bulges of the Dremel until it reached it's nesting point. -I also put 0.15mm of space between some connecting surfaces, so that most people won't have to do any sanding or resizing. I recently got a Dremel to make quicker work of touching up 3D printed parts. I got the 8220, and I got a Flex Shaft. Problem was, I didn't really have anywhere convenient to put the Dremel, so it awkwardly and loudly sat in my desk drawer while I used it. NO MORE! I can assure you that this mount is stable and secure from the 3 minutes of rigorous testing I did prior to uploading it! I plan on making a few more Dremel things, as to what and how many... time will tell!
Statistics
Likes
0
Downloads
0