Creality/Sovol Y Axis Belt Tensioner
Description
I designed this because I found it difficult to equally adjust each side of the original tensioner. This new tensioner allows you to adjust each side with M3 nuts at the front, which makes the job much less tedious and frustrating. The puller snaps into the frame, and the bearing pin sits in a groove cut into the puller, which doesn't allow it to fall out when tensioned. The pin press-fits into the bearings, so be careful! Hardware required: x6 M5x10 Hex screws x6 M5 T-Slot nuts x2 M3x40 Hex screws x2 M3 Lock/Hex nuts I used PETG for the frame and puller, and Nylon for the pin. If you have any problems, feel free to let me know!
Statistics
Likes
0
Downloads
0