Rice washer (fully printable)
Description
So I've finally finished full redesign (or making from the scratch to be true), printed and assembled the new version of rice washer. It is smaller, have better look (I hope :) ) and is much easier to assemble after print (less details and no glueing/filament welding required). It fits about 150-160 g of rice which is more than enough in my opinion. It is also fully printable - even its mesh can be printed (but you can also use one bought in store ofcourse). The only thing you need to buy is pair of plastic/ceramic bearings (10*26*8 size) which are used for smoother rotation of the washer. But you can also try to use 3d-printed ones (haven't tried them but looks like it should work well) like <a href="https://www.thingiverse.com/thing:4821342">these ones</a> (you need 6000 ones). ###List of deails * Drum - 100% infill, 5-6 walls and supports. * Drum inset - 100% infill and supports * Mesh_x2 - you need two of them. 0.3 layer height (or 0.15 if you wish better quality) * Drum cap - 20% infill. * Axis - you need two of them. 20% infill. There are 2 variants: * * Rice-washer_axis-8.5_x2 - tight fit, default option * * Rice-washer_axis-8.0_x2 - loose fit. * Tray - the part not ready yet, will add it in next two days
Statistics
Likes
1
Downloads
0