CR Touch Holder for Red Squirrel - 4mm Shim
Description
Loved the design so I printed this CR-Touch mount to go with the Red Squirrel cooler on my Ender 3 Pro (2020). Like the other commenters, once installed I found the CR-Touch to be too high so the nozzle hit before the touch triggered. I created this quick matching shim to extend another 4mm down and now it works great. Figured the shim approach would help others and make the model easily adapted to other printer heights. Just scale the z in your slicer for whatever height you need. When stored the CR-Touch tip is just barely above the cooling nozzle. The shape is a direct cut from the original so once installed you can't tell it's not the same part (if you print in the same filament color, which I didn't). I'll likely come back with a whole adjusted mount, if OP KEL_Morian doesn't beat me to it, but this will get those with the same issue going without a reprint. Print the original and this if in doubt ahead of time. Otherwise, hopefully you have a second printer like I do so you can print the fix after realizing you need it. :) PS for those wondering about the cover over the Noctua fan, I'll be uploading that soon too. Much cleaner look than the brown fan. Thanks to the OP for the great starting point. Just didn't work out of the box for my printer.
Statistics
Likes
0
Downloads
0