68mm XeroWhoop 35mm props
Description
This is a 68mm version of the original 75mm XeroWhoop with 35mm props. I found that the frame is substantially lighter and flies much better than its 75mm counterpart. There are 3 FC mounting options, on top of the Whoop Frame, at the bottom of the Whoop frame like NBD's 75mm frame and/or the bottom plate like a toothpick. The canopy and Battery holders are recreations of Angry_Don and FPV_Skittles' work respectively. Print Canopy, Battery Holders and FC Soft Mounts in TPU. I've printed the frame in PLA, PETG, SBS and ABS. I have broken a few PLA frames but the SBS and PETG frames are still holding up, I do prefer the SBS as it's the lightest filament and takes impacts well. I haven't tested the ABS frame. I'm sure everyone will have a suggestion for a better filament. Print the frame with a random Z seam alignment as the whoops tend to brake on the seam. I use a brim for bed adhesion purposes.
Statistics
Likes
1
Downloads
0