Bench press block - 3/4 boards - 7.5cm/10cm
Description
ATTENTION: The magnets may be too weak for a weight of 1kg. I will upload a version with more magnet bores. In the meantime, you can print it with less material so that the weight is reduced. Bench press block. If you need it, you know what it is. Has grooves with 31mm diameter at 75mm and 100mm height. Each contains four cylindrical 8mm x 3mm magnets to attach to the bar. I printed it in PETG with 10% triangular infill and 15% infill modifiers below the grooves for extra strength and 2.5mm wall thickness. Since it's a large print, it may warp and lift its edges. Take care to print hot and in a warm environment. It could surely be made of PLA with a bit less infill/shells as well, it depends on the bar weight.
Statistics
Likes
1
Downloads
0