EB4 S2 Brushless Conversion
Description
Project continues.. for some reason I'm getting an error when trying to edit my original. Hardware required: 6 x M3 barbed brass inserts (center diff support & Servo box) ( I will eventually add a design you can just tap M3 when finalized) 2 x M3 x 20lg Screws and nuts (Tension block) 4x M4 x 12lg Button head and nuts (Motor cradle) 1X M4 x 30lg Hex Screw and nut (motor mount tension) Other fixings required should be able to use the original items. I'm still working on the battery tray and a retainer for the ESC. Feedback in the comments appreciated. Print with supports. I'm using 25% infill update 23/3/22 Modified the tension block design to pull as well as push and lock the position in place using nuts either side of the tension block. (I'll update the photo eventually) Small mod to the motor cradle added captive nuts. Centre diff support 0.4 has a small notch to clear the screw hole for a bracket I'm designing for the ESC. 0.3 will work fine if you have that.
Statistics
Likes
0
Downloads
0