Anycubic 4Max Pro 2.0 Fan Duct for Stock hotend w/ E3D V6 Nozzle
Description
I made this because I couldn't find any fan ducts designed for the 4Max Pro 2.0 that would work with the stock hotend and an E3D V6 Nozzle. It's not my design originally, as I simply modified one that had already been made. I shortened the "tower" of the fan duct to allow the nozzle to stick out below it, since the stock duct makes printing impossible by sticking down lower than an E3D nozzle, and also added a small, semi-circular cutout so that the longer of the two screws can get in unimpeded. This uses the hardware from the stock fan duct. Bare in mind, this is NOT made for people using the E3D V6 hotend, or people using the stock hotend and nozzle. For those, normal fan ducts should work (though depending on what files you used for the conversion to an E3D V6 hotend, they may not).
Statistics
Likes
0
Downloads
0