Craftsman C3 to Dewalt 20V Battery Adapter
Description
The source from which I remixed was almost exactly what I wanted, it was just is a little rough. I've really just refined the fitment. Changes made in this remix: - Shifted the center column forward a bit. - refined the chamfer on the outer front corners to better match the tool receptacle. - refined the electrode placements a bit to line up with tool electrodes. - widened the very front part which makes contact with the last section of the Dewalt battery's grooved area to eliminate a high-friction point. - shrank down the column a tiny bit in X and Y, but not in Z, to reduce friction. - Narrowed the front spline a little to reduce friction. - Redesigned the release tabs so that they are easily pressable, but no reliance on layer-adhesion is needed to keep the tabls attached. Removing the adapter now requires more similar squeeze-force to the OEM C3 battery buttons. - Added "+" and "-" Labels to aid in wiring. (verify with your meter though, you might do something weird like put the terminal block in upside down or something, and I accept no responsibility if you fry a tool).
Statistics
Likes
1
Downloads
0