Fan Shroud for Micro Swiss Direct Drive on CR-10S Pro V2 and CR-10 Max
Description
Fan shroud for installing the Micro Swiss Direct Drive Extruder on the Creality CR-10S Pro V2 or Creality CR-10 Max. The CR-10 Extruder/Hotend package comes with the 4 finned cooling block. The CR-10S Pro/CR-10 Max All-Metal hotend comes with the 5 finned cooling block. Either hotend will work when paired with the Direct Drive extruder, just verify which cooling block you have and print the appropriate STL. The part cooling duct is on one side only to keep the BLTouch in the same position as the stock configuration. This way it doesn't require custom firmware to change nozzle-probe-offsets. *Print Settings* Material: PETG Supports: Build Plate Only Infill: 20% *Specific parts the fan shroud was designed for* Extruder: Micro Swiss CR-10 Direct Drive Hotend Option 1: Micro Swiss CR-10 All Metal Hotend (4 finned cooling block) Hotend Option 2: Micro Swiss CR-10S Pro All Metal Hotend (5 finned cooling block) Part Cooling Fan: 4020 Blower Hotend Fan: 4010 Probe: BL Touch
Statistics
Likes
7
Downloads
0