Toyota 86 Logo - Classic
Description
This is a simple import of an SVG I found online. It didn't lend itself perfectly to printing in the tri-color design, so I chopped it up, cleaned up the bits, and stuck it back together. It's not really designed for any purpose except to serve as a simple, clean starting point for other projects where you'd want to have an easy to print multicolor logo using simple layer-height filament changes. It should be easy to resize as needed, just keep in mind that if you scale it you'll want to increase/decrease the Z axis to match your needs. If you shrink it down you'll want to thicken each layer to preserve enough height at each color that you don't get too much "bleed through" from the color below. My photographed model was done at 0.2mm layer heights, so it's 5 layers of black (purely for some structural bones, since black saturates easily) with 3 layers of red and 3 layers of silver. As you can see, the red is fairly dark - it'd have been brighter if I'd gone one or two more layers thick.
Statistics
Likes
1
Downloads
0