LUKE SKYWALKERS LIGHT SABER - 3D MODEL/3D PRINT
Description
This is a 3D model of Luke Skywalkers Light Saber. The model comes in 1 piece or in 2 halves to fit on smaller printers. It is scaled to a realistic size and is modeled from movie level props. Print the bottom half vertical and the top horizontal(you can try the top vertical, but the supports may be hard to remove) I hope you enjoy this model! It can be scaled to any size for any purpose! It can also be used for a video game or any type of art/design. Go out into space today and restore balance to the force! Print with at least 3 walls and at least 25% infill if this will be used as a prop to insure durability. I suggest PLA for this print so it can be easily painted. You can use PETG if you are going to have this in heat for long periods of time, such as cosplay outdoors. It can be printing vertically or horizontally. Horizontal will use less supports and will be a little stronger. Vertically will look nicer and use lots of support, but could be brittle from the layer lines if the print goes bad. Good luck printing!
Statistics
Likes
223
Downloads
0