Pickle Jar Siphon Clips
Description
Edit: 3/6/2022 - Uploaded images of this in use For my Resin print cleanup, I like to use these pickle jars: ( https://www.amazon.com/gp/product/B06WD1F7HD ) To make the most of my IPA/Mean Green cleaners, i like to siphon the good stuff from the top of the jar once the resin residue is has settled to the bottom and then blast whats left with some UV and filter it out and then top up my cleaners. Due to how light these pickle jars are it can be tricky to get your siphon hoses in a good position so i designed these siphon clips to help secure the hoses in both the source/destination jars. These should work with any container that is 5" in diameter and i've included 4 sizes depending on your hose size. (9.5mm, 11.5mm, 13.5mm and 15.5mm) My hose is 13mm outer diameter so it easily slides in the 13.5mm hole and it stays in place and makes the process much easier. Hope someone can get some use out of this! These can be printed directly on the build plate, flipped so the top surface is on the build plate and you will need no supports.
Statistics
Likes
0
Downloads
0