Modualar Coral Frag Rack
Description
This is a modular frag holder that you can expand to meet your needs. The holder hangs on to the side of your tank and I have also created suction cup holders that clip on. The holders have 2 different depths,124mm and 162mm. I created clips for a rimmed tank, 1/8, 1/4 and 1/2 inch glass tanks. I don't have a non rimmed tank so if they don't fit, let me know so I can adjust them. I created frag holders that clip onto the main part so you can move them around as needed. They have bevels on the bottom to hold frag plugs tight (I also created them without the bevels). They are in 3 sizes. Here are the plugs the a lot of the items were designed around: https://www.amazon.com/dp/B09JTQG46B?psc=1&ref=ppx_yo2_dt_b_product_details The extension piece along with the 3 clips can be printed multiple times to extend the depth of the holder to the depth you need. I also create a coral propagation basket and coral propagation plug holder if you need. All parts were printed at 100% infill using .2 layer height. To keep the holder from moving, I created everything with tight tolerances so depending on your printer, you may need to adjust some. Everthing except the main hangers and basket have been designed to print without support.
Statistics
Likes
2
Downloads
0