Mount for a ZFC39 PWM Fan Controller Board inside a Computer Case
Description
This is a mount for a ZFC39 PWM fan controller board inside a computer case. I was building a NAS system with an old computer and the mainboard only has PWM control for the CPU fan, not for the fans inside the case. So I went for this controller board and needed something to mount it inside the case. The mount is for attaching it to the strut on the side next to the drive cage by means of a cable tie. I used heat inserts in the holes on the carrier board and M3 screws of matching length. The temp sensor can then be put near the hard disks and the fan for HDDs gets temperature control. I added a mounting position for the beeper. I also have included the Fusion 360 file so you can modify it to your needs. I used this board: https://www.amazon.de/gp/product/B07SQQGBY9 There is no manual from the manufacturer of the controller board, but I found two YT-Videos on this that also have plenty of information in the user comments. https://www.youtube.com/watch?v=ZldI9R1zOGE https://www.youtube.com/watch?v=cRnuiG69OI4
Statistics
Likes
0
Downloads
0