Logitech C920 C922 CS case and backplate for original heatsink

Logitech C920 C922 CS case and backplate for original heatsink

Description

Here is a case for use with CS lenses. I modified the original giving more space for the wires and adding a place for the connector to live. This also has top and bottom 1/4-20 screw holes so the camera can easily be flipped. The case has a 1.1mm recess for a filter up to 21mm in diameter. A 20mm 650nm filter would give you visible light and block infrared. (Search for something like "IR650 circular filter 20" on ebay/aliexpress) Supports definitely required for the case. print on its back with 15% supports There is a backplate option where you may be able to re-use the original heatsink from the Logitech camera. My build was with a C920e. For all the other parts, see the original here: https://www.thingiverse.com/thing:4560254 One photo shows all the parts: Pick a lens: 2.8-12mm CS lens or 6-60mm CS lens, or anything you want 20mm IR Cut (650nm) filter Board from C920/C922 with USB cable and lens removed C-clip for USB retention \#6 screws 1.8mm screws (from original housing) heat sink (from original housing) USB cable from the camera Prints for front and back of the case

Statistics

Likes

1

Downloads

0

Category

Camera