adjustable tube stock, tough and reliable
Description
A basic stock designed for a normal AR buffertube and airsoft buffertubes. Firstly I'd like to say that if any of Y'all have a problem, leave a comment a I'll try to modify it to fit your specific needs. This stock is just a simple two moving parts. Items needed One stainless steel bolt, Pan Phillips machine, 10-24 X 1 1/2 in One stainless steel nut, Nylon insert lock nut, 10-24 Two stainless steel flat washers. One to two rubber bands One piece of string(optional) Assembly should be pretty straight forward, but just in case, here are some pictures. https://photos.app.goo.gl/L9gFJcD6hGs1B2bt8 Step one, put the parts on to the bolt as shown, in the order of -washer, rubber band(tied around the bolt), washer, nut, big plastic pin, then small plastic pin. If you get the right sized bolt, the pins should just thread on. I did have to use a screw driver to hold the bolt while I twisted on the pins. Now once you put the pin into the hole on the stock, tie the rubber bands not tight( the rubber shouldn't be stretched at all), that was the right tolerance for it to work correctly when used in conjunction with my stock buffertube. Then you should be good to go, just pull the bold out to adjust then push it in to lock. Have a wonderful day fellas. If you have a comments my Gmail is davidwilsonii56@gmail.com PRINT SETTINGS I did 6 walls with 20% infill and tree style supports. PLA+ 226C bed wash 65C
Statistics
Likes
1
Downloads
0