Anycubic Mega-S Z-Axis Anti-Wobble Support
Description
The tolerances on this source remix were too loose for my liking and printer, so I remade this and tightened them up. The bearing slot diameter is 22.1mm, and the bore distance is set to 24.8 (as opposed to 24.5 or 25mm) I'm also using M2 bolts, so the holes are appropriately smaller, which allows for a shorter height, and thus fitment closer to the top of the printer, thereby allowing the maximum z-space for printing (albeit only by a couple of extra mms). Finally I added a nice fillet for further support and stability
Statistics
Likes
1
Downloads
0