Bontec Monitor Riser Stand Extension
Description
Simple extension tubes to allow you to have a Bontec monitor riser/stand higher for a more ergonomically correct screen height. There are two stls - a 95mm extension and a 30mm extension. You can print as many as you need and join them into each other like lego to get the height you'd like on each corner. Once printed, unscrew the standard legs and remove the rubber foot. Insert the extension(s) into where the foot was and put the foot back into the last extension you're adding. Screw it back in place. To print, you can either print vertically, or horizontally and I recommend supports in either (but very small % infill on the support).
Statistics
Likes
0
Downloads
0