Tandy Radioshack Red arrow Golden arrow + others Rear Hub Adapter
Description
After getting my old childhood Tandy/Radioshack Red arrow RC buggy out of the loft and restoring it I wanted to be able to swap the rear wheels for some that were less worn. (tested on my Thunder Fox which is the same , just a different shell) The original wheels are difficult to find and if you do find some they are usually that old they are perished. I decided to try to design a small adapter that would fit inside the original hub to allow a 17mm hex buggy wheel to fit. Note: Im new to fusion 360 and designing so this doesn't fit exactly but I have tried to make it as tight as possible so once the brim has been removed it will need pushing into the hub. I printed it in PETG, 0.4 nozzle, with a brim, 100% infill.
Statistics
Likes
1
Downloads
0