[WIP] CR10 standalone case (splitted)

Description

<b>This remix is currently 'work in progress' Surely a few things might change in the future ;)</b> <b>2022-03-17</b> LVC_SKR_1.3_1.4_PI4B_V3 - SSR passage position should be corrected, not printed/tested yet - RaspberryPi standoffs redesigned to avoid the formerly needed support - removed some holes at the split for an easier printing without support for the SSR hole Danger letters v1 - Z axis extended to 1.2mm SolidState_Cap_V2 - Widened the cap +2mm (maybe more is needed, will test later) <b>2022-03-16</b> Box_High_Voltage_V3_-_Meanwell - reworked the high voltage box to fit a Meanwell SP200-24 power supply - changed the hole for the SSR to fit better to the alternative power supply - removed some holes at the split for an easier printing without support for the SSR hole Cover_high_voltage_V3_1 - deepened the letters to 1mm and widened them 0,1mm at the edge so it's possible to press in the letters (i've expanded them to 1,2mm in z) Cover_high_voltage_V3_2 - Widened and added additional air vents to make sure the power supply will get enough air <b>Attention! The low voltage box has to be reworked too, because of the changes made to the high voltage box regarding the SSR.</b>

Statistics

Category

Tags