AMD Radeon Instinct MI8 adapter for Foxconn J50GH (DELL) blower fan
Description
This is a printable adapter for AMD Radeon Instinct MI8 and Foxconn J50GH (DELL) blower fan. Full length around 32cm. - prints without support - print with 3-4 walls for rigidity - small cut-out for fan connector cable - room for 8pin power connector - built-in 'brim' for aditional grip surface to print bed - cut 0.2mm from the bottom if you don't need it - fan can be push-fitted in both direction (plastic claws from the fan needs to be cut down!) - can be attached to the VGA metal body using M2x8mm screws - you just need to remove two original screws - electrical pinouts are attached
Statistics
Likes
3
Downloads
0