Under Mount Hooks (3.5"/85mm, for PC or anything else)
Description
I wanted to mount my MSI Pro DP20Z 5M computer underneath my desk. Its official dimensions are 85 x 160.55 x 193.3 mm but the only one that matters in the height 85mm/8.5cm which is essentially 3.5" (3.34646), This one does have about 1cm of clearance at the top, so overall you have 95mm clearance. Print a couple of these and you can mount anything underneath your desk. I've also attached a picture of a couple versions along the way that i used to test. First one with all straight edges, Had some breaks due to getting bumped, made adjustments like rounding the under side of the shelf portion , had some more breaks etc. This is my 4th and final version of it. I did print some of these with 1.2mm walls and 20% infill, so that may have played into the durability but so far a couple weeks with this latest version and its working great. In the image above, you can see a break spot on one of my versions, all my versions ended up breaking at this same point, until this latest version.
Statistics
Likes
2
Downloads
0