Gorilla Sand/Soft Soil Ground Stake
Description
280mm long monster sand/soft soil ground pegs for tents, awnings, gazebos or whatever requires pegs to secure to sand or soft soil. As with any plastic type pegs, to be driven into the ground with a rubber mallet only. Printing recommendations; Minimum 6 perimeters, 20% Grid infill and 6 top and bottom layers. PETG, ABS or ASA. I haven't tried PLA but I cannot see why it wouldn't work as well so long as you print with the printing recommendations outlined above. No supports required, file is in the correct orientation for printing. Can be scaled up or down to suit the maximum diagonal size of your build plate. Happy printing.
Statistics
Likes
57
Downloads
0