Amazon Echo Dot (3rd Gen) mouldable hang mount
Description
Simplified version of leefla's design, made to hang from the top of a dresser. Rather than designing the correct sized hook, I left that part of the model flat, so that a hairdryer can be used to soften the plastic and then mould it by hand directly over the place where it will hang. I also increased the dimentions slightly, so that the legs should no longer snap off when placing the Echo Dot inside the mount (untested). Fusion 360 > Modify > Scale > 1.0027 The inner diameter is now 9.9cm (2.5mm larger) aprox.
Statistics
Likes
0
Downloads
0