NR200 x MSI Ventus deshroud mod (Noctua NF Series Version)
Description
<h3>TLDR</h3> <ol> <li>Deshroud mod for the <b>MSI Ventus 3080/3080Ti/3090</b> in the <b>Cooler M<aster NR200</b> case</li> <li>Fan shrouds designed to perfectly fit the <b>Noctua NF-A/F/S12</b> and bridge the gap between the fan and the GPU heatsink </li> <li>2 Versions available for use with & without fastners (case fan screws)</li> <li>Mod also available for the <a href="https://www.thingiverse.com/thing:5254890">Arctic P12</a> and other <a href = "https://www.thingiverse.com/thing:5280529">Generic 120mm Fans</a></li></ol> <hr/> <h3>Notes</h3> <b>MSI Ventus 3080 only?<b> Yes and no. Yes because this is designed to hug the Ventus' heatsink as snugly as possible, so unless other cards are of the exact same height post de-shroud, this would either be too tall / short. On the other hand, the ventus 3080, 3080Ti & 3090 from MSI all shares the same cooler so technically this also supports the Ventus 3080Ti & the 3090. <br> <b>Noctua NF series only?</b> The fan shrouds here will <b>only fit the NF-A/F/S12</b>, I've also released versions for the <a href = "https://www.thingiverse.com/thing:5254890">Arctic P12</a> & <a href = "https://www.thingiverse.com/thing:5280529">Generic 120mm Fans</a>. <br> <b>How to mount?</b> There are 2 ways to mount the shrouds to your NF series fans and they will require you to print different models: <ol> <li><b>Mount without fastners (There are pins & tabs designed into the model which allow the shrouds to rest snugly on top of the fans without any fastners)</b><br>Noctua-L Shroud (No Screws).stl<br>Noctua-R Shroud (No Screws).stl</li> <li><b>Mount using fan screws</b><br>Noctua-L Shroud (Normal Fan Screws).stl<br>Noctua-R Shroud (Normal Fan Screws).stl</li> </ol> <hr/> <h3>Like, download and visit my <a href = "https://www.patreon.com/johanncc">Patreon</a>!<br><br>Have nice day!</h3> <hr/> NF-A12 model used in rendering by <a href = "https://grabcad.com/library/noctua-nf-a12x25-fan-1">Kelvin Limanto</a> Heatsink model used in rendering by <a href = "https://grabcad.com/library/accelero-mono-plus-1">HDRI</a> (Adapted)
Statistics
Likes
4
Downloads
0