Beam Support for Ceiling/Wall Storage or Clothes Dryer Rack/Hanger
Description
Simple wall support for a wood beam of 21x27 mm (SketchUp files available for adjusting). Two designs to put the beams in both ways. I'm using this for a "ceiling" storage as well as a clothes dryer. I've included a "hanger reacher" to be attached to a rod. Wall hole is for 3.5 mm screws. Side holes are an extra if you want to hold the beam down, the holes are for 4 mm bolts. ...And I forgot, I've included a wall mount for the "hanger reacher" which isn't to specs and just breaks, I should just remove it or separate it from this, idk. Apologies. _____ **All of my designs have roughly a 0.1 to 0.3 mm offset/compensation for things to fit together** according to how my printer prints. I have no idea if this is a universal problem or not. **Supports on my designs are always minimal if not nonexistent.** Here there is none needed.
Statistics
Likes
1
Downloads
0