Laser marker to the drill press
Description
Summary Project assumptions Upgrade old drill press by adding laser marker. Precise and cheap. the mount board is designed for polish drill press construction WS-15 and WS-16 (these models have screwed covers on the front) After leveling the mount board for better stiffness needed to fill the gap between this board and the machine - silicone or better hot glue (may melt PLA) The laser holder has 4 nuts and bolts (each laser) for fine adjustment and assembly. The uploaded prototype is mounted on the machine and has been in use since January 2022. Needed to make marker: LED laser 5mW 3-6V (line) - 2pcs M2.5 nut - 8pcs M2.5x10 internal hex bolt - 12pcs 2xAA battery holder rocker switch velcro stripe This is my first uploaded project. https://youtu.be/AqQ9h9XaU38
Statistics
Likes
84
Downloads
0