Gear Indicator Holder for GS500E Neutral Light Canal
Description
This is the Mount for a Gear Indicator i bought from Amazon (https://www.amazon.de/gp/product/B08CZHHTLJ/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1 ) to mount the Indicator in the Same spot the Neutral Indicator Light is on the Cockpit. I printed it With TPU Filament so its Flexible enough to let the cable pushed through and be fittet in the Hole after removing the Green Plastic cover and the Bulb on the back end. I used a Controlled Heat Gun to soften the Hot Glue on the Gear Indicator to displace the Cable Position to fit the Mounting Position. Also i Had to extend The Wire for The Positive Connection to reach into the headlight. Support is Included in the File. Just Print in the Position it is in the file. Infill ~20-40% Material TPU Print Time ~30-40 Minutes at 60mm/s
Statistics
Likes
0
Downloads
0