RapidFire FPV Ground station dock - DIY Dock King
Description
The FuriousFPV Dock king seems to have been discontinued so I started looking at making my own and came across the article below. Credit to the author of this article which explains what you will need to know. https://www.newbeeblogs.com/post/fpv-module-dock-diy I didn't really like any of the available case designs out there so made my own. I used: 1x 1/4-20 Nut for the tripod mount. 8x Self tapping M2.5x10mm screws (4 front, 4 back) 1x Matek Micro Bec 5/12v 1.5A (leave it set for 5v) 1x 2.1mm x 5.5mm DC Socket 1x PJ-392B-4 4 Pin 3.5mm Audio Socket 1x 2.54mm PCB Pin header socket Battery I used a 2s Li-ion DIY 18650 pack. It is mounted on the back to help balance with larger antenna. There are 2 back plates one has some rests to help stop the 18650 sliding down and the other is flat. One other note, behind the module I uses some 1mm EVA foam strip applied to the face of the mid section to help make the module snug and not wobble about. Enjoy!
Statistics
Likes
15
Downloads
0