Roborock S5 Max service station
Description
Parts for building a service station for the Roborock S5 Max robot vacuum cleaner. It can be stowed the user manual, wipe holder and wipe at the service station. Looks very clean in white. I printed it with PLA. You will need a **20mm** rod/tube to hang the wipe. I took an aluminum tube from the hardware store and made it about **17cm** long. The holes of the drillings are for simple wood screws with a diameter of **2,5 to 3mm**. I recommend you to screw the parts on a wooden board and to fix the wooden board with two screws to the wall. You can of course also screw all parts directly to the wall, then you just have to drill some holes in the wall. It is usually more difficult to drill holes in a wall for a perfect fit, so I recommend using a wooden board to attach the parts. Possibly the parts are also suitable for other Roborock models, unfortunately I could not check. I also recommend adding overlays to the drill holes when printing (see pictures) to increase the wall thickness and infill so there is a little more material in the area of the holes when tightening the screws. I always print holes this way, it may not be necessary.
Statistics
Likes
2
Downloads
0