Sunlu S8 Angled LCD Lid KiNG
Description
My stock LCD/motherboard electronics box cover to relocate the LCD to a more usable area and make the screen readable from the front. Make sure you squeeze it together when tightening to reduce any gaps between the lid and side panels. Parts should be oriented as they should be printed. No supports needed on any part. Use a 15-25mm brim for the main lid to reduce distortion in the upper areas of the 350mm print. Use 4 walls with a .4mm nozzle and .2/.25mm layers. 45-50mm/s is good for the first half, I'd drop to 35-40mm for the second, right before the LCD bridge. this will help with the upper half quality also. Requires: 9x M3x6mm screws 5x M3 t-nuts or your preferred rail nuts If you find my parts helpful, please consider donating to continue my research and progress in my projects. Paypal: Mike.king.2590@Gmail.com Venmo: @Maikumizu Cashapp: $Maikumizu Patreon: https://www.patreon.com/KiNG3D
Statistics
Likes
0
Downloads
0