Logitech Loadcell Brake
Description
Use these bushing to convert Logitech brake pedal to load cell. I used a random spring I found at work to actuate the brake and switched the throttle and brake pedal spring for more realistic feel, but a rubber bushing would work also. Load cell had an amplifier built in so easy to convert too. Red wire hooks to red, Yellow on the load cell to white on the pedals, and black to black. White on the loadcell is not used. Loadcell is FX293X-100A-0100-L. It is a 100lbs load cell so it take a decent amount of force to get full pressure would recommend using 50lbs loadcell (FX293X-100A-0050-L) if you don't have a rig. Both are available at multiple sites if you search for them.
Statistics
Likes
0
Downloads
0