Quadcopter FPV 250 propeller guard and landing gear for 6030 / 5030
Description
I Am Totally In Love With Quadcopter, And So I Bought Myself A Fpv 250. As Newbie To This, I Didn'T Think About How Fragile The Carbon Props Are Compared To My Skill ... Lesson Learnt, So I Made This Propeller Guard, In Hope It Will Save The Next Props I Bought. Update 20150420-1200: I Have Added Landing Gears Which Could Be Mounted With Cable Ties Or Can Be Screwed With 3Mm, So Battery Has Enough Space Below. Additionally, I Have Modified The Guards To Take These Landing Gears And Both Could Be Screwed. Both Parts Could Be Used Independently, But Together Will Be Good Stuff. Update: After Mounting These Guards And The New 5030 Props, I Was Successfully Able To Fly. I See No Impact On Flying Behavior. This One Is For Carbon Arms With 3Mm Height, The Drill Hole Will Take A 3Mm Screw And Drill Hole Has To Be 30Mm From Middle Of Motor. Motor Space Is For 28Mm, Arm Width Is 24.2Mm. I Will Make It Customizable And Give You Openscad Once I Feel It Is Good Enough To Publish. If You Have Made Good Experience With This, Please Share Your Print And Leave A Comment ;-)
Statistics
Likes
57
Downloads
0