Arcade Joystick Tops Set 2 Plus Skirt/Disc replacement
Description
Here is my second set of replacement arcade joystick tops (and skirt) that I have designed to work with your standard Sanwa type joystick, that have a screw thread. They are push on to fit and don't require screwing. This set has more of an emphasis on BIG. JST_BIGball (71x71 vs 35x35), JST_BIGdome being like the previous but cut into half and JST_capsule being like two normal ball tops stacked up. Also included is the biggest wave skirt which is a disc replacement but with more... flare. I have tested them with a variety of different Sanwa clones and the fit varies but only a little, a first time fitting can be a little fiddly but they also don't come off easy so I see that as a good thing. Mind you don't trap your fingers between the top and your control board when the blighter suddenly drops on. _4415H in the file name means: 4 top layers, 4 bottom layers, 15% infill & H is Hex infill. _445L means: 4 top layers, 4 bottom layers, 5% infill and L is Line infill I have designed more standard tops and intend to make more custom ones in time, please consider supporting me on Patreon to unlock access to them: https://www.patreon.com/3DFreeman Here's a non-affiliate ebay link to the type of cheap and cheerful Sanwa clone I use: https://www.ebay.com.au/itm/334119951114?hash=item4dcb19db0a:g:Ka0AAOSwaqxhHjfn&frcectupt=true Thanks for checking out my designs.
Statistics
Likes
0
Downloads
0