Sage / Breville Dose Control Pro worm gear
Description
Replacement worm gear for the gearbox on a Sage / Breville Dose Control Pro grinder. It ios very likely the same as the Smart Grinder, and possibly other grinders from Sage / Breville. To fit, the iold gear needs to be cut off and the shaft needs to be modified. Simply file or cut the top of the shaft down to meet the flattened edges. The gear is a friction fit, you can hear the shaft with a flame and press the gear on for a tight fit. please note; i only have access to PETG and this did not last very long, I highly reccormend printing in Nylon to withstand the forces on the gear. please feel free to experiment however.
Statistics
Likes
0
Downloads
0