Left Handed Insert for Olfa H-1 Cutter
Description
Being a southpaw, I always have to work around tools being made for the right-handed world. This is my work-around. This part allows the razor blade in the Olfa H-1 to be flipped upside-down so the knob is placed outside the hand rather than against the palm when held in the left hand. It is designed and tested on the H-1 but may work on the NH-1 and XH-1. Please let me know if it does or does not work with these other knives. Print with PET or ABS, 0.2mm layer height, 0.4mm nozzle, 50% infill After printing, insert 2 M4 nuts into the back of the part. Swap the spring steel clip from the factory insert to this one and reassemble your knife.
Statistics
Likes
2
Downloads
0