LM2596S Buck Converter Housing
Description
Just needed a simple housing for a buck converter. Text on side reads “Ya ikou!” or “Hey let's go!” → My business (www.yaikou.com) Buck Converter(s) Used: https://www.amazon.com/gp/product/B07QKHR6PY?&linkCode=sl1&tag=carbonneutr0e-20&linkId=b83ef275b8543909c5dc55c0229d02a3&language=en_US&ref_=as_li_ss_tl Assembly: - Solder wires to the top of the pads before placing in the housing - PCBA should just 'clip' in at the bottom - Lid clips in. You can adjust the voltage through the vent in the lid - Two 3mm holes in bottom to mount the housing Before energizing the module, make sure the screws will not interface the bottom of the PCB. I left 4mm between the perimeter "standoff" and the bottom of the PCB, but check for any through-hole components that may interfere.
Statistics
Likes
0
Downloads
0