[3Dino Puzzle] Classic Style T-Rex

Description

This is 3D puzzle that classic style Tyrannosaurus. Since there are only a few parts, 3D printing time is short and assembly is easy. When 3D printing, it is convenient to use packaged STL models with all parts in one package. STL models are available in two types: regular and "0.1mm". Set the pitch to 0.3mm for normal models, and set the pitch to 0.1mm for models marked with "0.1mm" and 3D print them. For 0.3mm, bumps created by 3D printing The following table is adjusted to take into account the following factors. If you want to make high quality 3D prints or 3D print larger sizes, please use STL models with "0.1mm" written on them. [Print Settings] Rafts:No Supports:No Infill: 20% Nozzle: 0.4mm Filament: PLA Pitch(Layer height): 0.1mm or 0.3mm Print speed: 60mm/s Travel Speed: 100mm/s [3D Print Time] Pitch 0.3mm: 1h35min Pitch 0.1mm: 3h:06min

Statistics

Category

Tags