Sidewinder X2 Z-Axis Stabiliser Brackets
Description
<h2>LOWER Brackets: </h2> Taken from here. https://www.thingiverse.com/thing:5223887 (I recommend you use supports if printing flat on the bed. <h2>UPPER Brackets: </h2> Use my version designed from scratch. TWO will be required <h2>HARDWARE:</h2> Stainless steel preferred for looks 1) Designed for 10mm threaded bar. 2 lengths of 595mm required. 2) M10 Nuts ( 8 required ) 3) M10 Washers (8 Required) <h2>ASSEMBLY TIPS:</h2> <ul> <li>Attached the lower brackets first.</li> <li>Put 2 nuts and washers on each bar for the inner faces.</li> <li>Thread the bar into the lower bracket and attach the lower nut (include washer)</li> <li>Tread the upper bracket over the bar and attach (loosely) to the printer.</li> <li>Tighten the Lower bracket M10 bolts to hold the bar firmly.</li> <li>Tighten the upper brackets to the printer.</li> <li>Add the final M10 nut with washer to the top.</li> <li>Adjust and tighten the upper M10 nuts... Do NOT put the gantry under pressure, the nuts are to grip it firmly in its naturally vertical position not force it one way or the other.</li> </ul>
Statistics
Likes
49
Downloads
0