Improved Hinged Voron V0.1 Top-hat with LED holders
Description
UPDATE: LED strip holder redesign. - 2022/03/22 Correction to the HINGES.stl file just posted 2022/03/18 NOTE: This design requires the original Voron V0.1 top-hat. --------- Great work by 93djen, (https://www.prusaprinters.org/prints/109713-voron-v01-tophat-spacer-with-hinges) but I had some fit issues and wanted more from the design. The main changes are: - hole placements seemed to be just a bit off for my one piece top-hat, so that was compared to the original Voron V0.1 CAD files - locating pegs that extend down into the frame (as per the original top-hat) - LED ramps on the side that were extended in length to better accommodate 30 LED/m strips - slight move on the hinge pivot point holes as they seemed VERY tight and needed to be filed oval to fully close with the original design - redesign of segment joints to better match the lip/contour and provide larger glue surface for acetone welding. (yes, I screwed and glued this baby together!) - Added cable tie holes to the original top-hat front corners, for LED power routing. I just glued the LED carriers to the frame as I trust acetone solvent welding more than cheap adhesive backing at temperatures over 30 C. STEP files provided for anyone that wants to make changes. Have fun.
Statistics
Likes
2
Downloads
0