Tormach Jog Controller Handle
Description
<h1>Job Controller Handle</h1> This is a handle designed for the Tormach CNC Jog Shuttle Controller. It's ergonomic design and magnetic base add versatility to the controller. After using the Tormach controller, I found it to be very light weight and a little difficult to hold. This lead to an accidental button press every once in a while, or jogging a liiiiittle too far. So I designed this handle. It is easy to hold in one hand, and the added weight just feels right. I originally designed it to include a bar of aluminum in the handle. This is to balance the controller in your hand, and really makes it feel like you're holding a piece of machinery. However I did include an STL of the handle without the pocket for the aluminum. **Required hardware:** 2x - M3 60mm Socket Head Cap Screw https://www.mcmaster.com/91290A181/ 2x - M3 Threaded Insert https://www.mcmaster.com/94459A140/ 7x - Magnets https://www.mcmaster.com/5848K12/ **Bolt required to secure weight inside handle:** 1x - M6 Flat Head Screw https://www.mcmaster.com/91294A239/ **Tormach Jog Shuttle Controller:** https://tormach.com/jog-shuttle-controller-30616.html
Statistics
Likes
0
Downloads
0