Kulp K16-A-B Controller PSU Mount
Description
Simple to print, print face down. This PSU Mount is designed to fit the standard hole dimensions for PSU (verified on Alitove and Meanwell). The design has a in-cut on the bottom to allow for nuts/bolts to rest above the PSU. Design only uses top screw holes on the PSU to allow the bottom to be used for PSU mounting. Mounting Hardware: 2x - M4 - 8mm bolts (secure mount to PSU) 4x - M3 - 12mm bolts/nuts (secure controller to mount)
Statistics
Likes
0
Downloads
0