Ender 3 DD BMG Fan Duct + BlTouch mount Bracket
Description
This Duct is for the TriangleLabs Right DD Extruder. It moves the nozzle 10mm forward outside the bed. Use 10mm hexagonal distance screws with holes for the nozzle screws and threads to mount these on the extruder plate. I print this duct with 0.16mm layer height, 3 walls and 0.5mm extrusion width. Support "All" but outside the duct and in the hole for the fan. Print it upside down. The Bracket was printed sideward down with support "All", layer height 0.25, Infill 40% triangle or cubical, 3 walls with 0.5mm extrusion width. The bracket uses the rail carriage and the extruder plate to reduce the torstions and movement of the extruder as other sideward mounted motors. Better install a linear rail MGN12H top of the x axis with this kit. https://www.amazon.de/gp/product/B09M73XRBH/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1 The motor is replaced with a stock 42-34.
Statistics
Likes
0
Downloads
0