L Grip for Mamiya C33
Description
This is an L grip for the Mamiya C33- should work for other C series TLRs as well. This grip features a cavity for a cable release, and a shoe which I'm using for a light meter. It's got an aluminum bar inside, so it shouldn't break on you (ideally, use at your own risk of course) Should print upside down for the grip part, and on the long flat side for the bottom plate, supports touching buildplate only. Materials required: 3x 8-32x5/8 machine screws, 1x tripod mount screw, length of 1/8" thick aluminum, and a drill. Instructions: stick bar in grip plate. Bend bar 90 degrees. Cut to length on grip plate side. Remove bar, mark and drill holes. Cut to length to fit grip piece. Remove bar, mark and drill holes. Put it all together. Enjoy.
Statistics
Likes
1
Downloads
0