VaseMode VapeStand
Description
double-walled vase mode vape stand. holds up to 6 upright in a 3-hole or a 6-hole stand. each hole is 22mm x 12mm inside. also a 6-hole stand but 3 holes have a 15mm bulge in the middle & a 19mm hexagonal hole in the middle. and 3 single holders print in PLA or TPU. Vase Mode .3mm layers .6mm line width & .6mm wall thickness (using a .4mm nozzle) set bottom thickness to 1.5mm made in tinkercad --- .03mm gaps in the end of each hole to allow double-walled vase mode. the tiny gaps usually just fuse shut when printed on my printer. (.03mm = .001181 inch) clear ones are PLA with sharpie marker. black ones are Ninjatek Cheetah TPU. TPU works great IF the thin gaps remain fused together, otherwise it may be a bit too floppy. --- UPDATED 04-15-22 renamed files & added 4 more: a 6 hole stand but 3 have a 15mm bulge in the middle 3 single stands: fat rectangle 22x12mm with a 15mm bulge round 12mm round 15mm all sizes are inside dimensions using the settings above the round ones are single wall
Statistics
Likes
1
Downloads
0